Views: 0 Author: Site Editor Publish Time: 2022-09-02 Origin: Site
The mechanical part of the laser cutting machine has no contact with the workpiece and will not scratch the workpiece surface during operation. The laser cutting speed is fast, the incision is smooth and flat, and generally no further processing is required.
How to ensure the cutting accuracy of Sheet metal Laser Cutting Machine?
What is the application scope of metal Laser Cutting Machine oxidation melting cutting?
What are the specific steps of using laser cutting machine?
1. The laser beam condenses into a cone. When the Sheet metal Laser Cutting Machine cuts, the laser beam is tapered downward. At this time, if the thickness of the workpiece to be cut is large, the cutting accuracy will be reduced and the cutting space will be large.
2. Different cutting materials will also affect the accuracy of Sheet metal Laser Cutting Machine. In the same case, the precision of laser cutting stainless steel and aluminum will be very different. The cutting precision of stainless steel will be higher and the cutting surface will be smoother.
The oxidation fusion cutting effect of metal Laser Cutting Machine shows that for structural steel with the same thickness, the cutting speed obtained by this method is better than that of fusion cutting. On the other hand, the cutting quality of this method may be worse than that of melt cutting method. In practical application, it can produce wider cutting strokes, significant roughness, larger heat affected zone and lower edge quality. Laser flame cutting is not suitable for precision models and acute angles (danger of acute angle combustion). The use of pulse mode laser can limit the thermal effect, and the laser power determines the cutting speed. At a given laser power, the limiting factors are the oxygen supply and thermal conductivity of the material.
When the laser cutting machine is working, if it fails, it will be very dangerous. Novices must receive professional training to operate independently.
1. Observe the general safety rules of laser cutting machine. Start the laser in strict accordance with the laser starting procedure.
2. Train the operators of laser cutting machine, be familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system.
3. Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.
4. Do not handle materials without knowing whether laser irradiation or heating can be used to avoid potential smoke and steam hazards.
5. When the laser cutting machine is started, the operator shall not leave the post without authorization or entrust others to be responsible. If it is really necessary to leave, the operator must stop or turn off the power switch.
Wuhan EETO Laser Equipment Co., Ltd. has been focusing on the production and development of laser cutting machines for many years, always focusing on customer needs. Here, you can choose the laser cutting machine suitable for you.