PRODUCT DETAILS
Home » Products » Sheet Fiber Laser Cutting Machine » FLX Gll Series High Power Fiber Laser Cutting Machine

FLX Gll Series High Power Fiber Laser Cutting Machine

EETO-FLX-GII series product is our new generation exchange table laser cutting machine. This new product is an improvement after collecting customer feedback after our first-generation product was widely put on the market. It's designed for metal sheet cutting processing. And the high lights of this model like below:
Quantity:


Overview


EETO-FLX-GII series product is our new generation exchange table laser cutting machine. This new product is an improvement after collecting customer feedback after our first-generation product was widely put on the market. It's designed for metal sheet cutting processing. And the high lights of this model like below:



HIGHLIGHT of EETO-FLX-GII LASER CUTTING MACHINE
  •      Fully enclosed integrated design to ensure operator safety.

  •      Production environment adaptation expert, with extreme ergonomic design.

  •      Beckhoff closed-loop EtherCAT control system ensures ultra- fast and precise cutting.

  •      High precision transmission components and parts, such as German reducer (Alpha), gear and pinion are adopted.

  •      Steel welded structure of machine bed with pipe-sheet welded, long term stability 10+ years and high positioning accuracy.

 


MAIN CONFIGURATION

Machine body

  •   Machine body was welded by thick pipe and also triangle structure used to make sure during long service time without distortion and vibration.

  •   Add brass support, the high reflective material to protect the machine body, and prolong the service life of the equipment.

  •   High precision milling to keep running accuracy and cutting performance, error under 0.01mm/m.

  •   Sand Blasting helps paint attach more closely to the surface of machine bed,and avoid metal surface from getting rust.

  •   With partition ventilation function. After tested, this new exhausting system can improve around 70%~80% fume-extracting effectiveness compare with other traditional designs.


Machine body




Control System Germany Beckhoff

     EETO-FLX-GII Series laser cutting machine is equipped with Beckhoff control system and bus motor. 

     Beckhoff control system is top brand industrial control system from Germany. 

     The main features of the system are as follows:

 

Control System Germany Beckhoff

 Open Technology  EtherCAT is an internationally standardized open technology, meaning anyone is free to use the technology in a compatible form. Today, the EtherCAT Technology Group is the world's largest field bus organization.


  Easy  EtherCAT is easier than classic field bus systems via onboard diagnostics with fault localization, automatic node addressing and no need for network-tuning.


  Functional safety  Safety over EtherCAT is just like EtherCAT itself-lean and fast. Functional safety is built directly into the bus with options for both centralized and decentralized safety logic. Thanks to the Black Channel approach, it is also available for other bus systems.



Laser Source Germany IPG

  IPG Photonics is the leading developer and manufacturer of high-performance fiber lasers and amplifiers for  diverse applications in numerous markets. EETO-FLX-GII series products served with stable and long lift time Germany fiber laser generator. And the advantages like below:

IPG Laser Source




With excellent laser beam quality and high work efficiency. 

Cutting speed is 2 to 3 times that same power CO2 laser cutting machine.


  Save energy and cost. With high efficiency for photoelectric conversion, three times than CO2 laser source.


  Low maintenance, the performance is very stable, the lifetime can be 100,000 hours.




Laser Cutting Head Germany Precitec
The German Precitec laser cutting head impresses worldwide with its high performance and automation. Precitec cutting head increased machine utilization and a shorter payback period. The amount of rework is reduced to a minimum.


Germany Precitec Laser Cutting Head

 Saving cycle time and operating costs. With high quality and high speed, you always achieve the optimum process results both in terms of quality and speed.


The performance is stable. The Precitec cutting head works trouble-free up to 30 kW laser power thanks to its sophisticated cooling concept and extended travel paths.

 

The function are powerful. With PierceTec - the automated piercing of the material - you achieve consistent hole and surface quality and can reduce the amount of rework required. 



 


Rack & Pinion Alpha, GermanyRack & Pinion 

Alpha, Germany

Reducer Alpha Germany Reducer       

Alpha Germany

Motion Power, Italy Servo Motors

Motion Power

Italy 



 

Small Detail Makes a Big Difference


External Optical Fiber

Are you still using inner fiber optic?

Did you trouble you when installing the machine?

Are you still paying high fees for fiber damage and fiber contamination?

 

  • The external optical fiber specially improved to reduce the damage of the optical fiber makes the installation of the machine so simple. You only need to remove the cutting head without removing the optical fiber, and then connect the cutting head to the external interface of the optical fiber and hang the optical cable on the machine.

  • This detail is rare in the market. It not only solves some of the problems of lack of experience in installing the machine, avoids dismantling the optical fiber to cause damage, but also scientifically avoids the internal pollution of the optical fiber, so that your machine can last longer.

  • The external optical fiber makes you no longer need to frequently delay the construction period due to the damage of this important component, which saves you a lot of maintenance and replacement costs.

 

 

外挂光纤

 

European Standard Electrical Cabinet

EETO’s machines is customized for overseas users. Adapted European standard electrical cabinet, the wiring is neat and the color of the wires meets the requirements of European standards.


 

European Standard Electrical Cabinet


                                            Separation of Strong and Weak Electricity                                                                                                          European Standard Wire Marks

 


Avoid electrical interference and prolong the service life of electronic components. 

Increases safety and the operability of maintenance management.



When running a new wire it is easy to simply pull the wire through to where it needs to go, and plug it in.

 The wire mark will help a lot If you ever need to troubleshoot a problem.


 


Closed-Loop Air Circuit Cabinet

  • If the auxiliary gas runs out, but the operator cannot figure it out on time. Then the workpieces damaged, What should we do?

  • If the auxiliary gas is too wet or too dirty, cause the optical glasses to contaminate then the whole cutting head is damage. What should we do?

  •  If we need to cut various materials, keep changing auxiliary gas causes the gas cost to increase. What should we do?

Here, EETO has a solution for those issues. Our closed-loop air circuit cabinet can save cost, increase the production speed and prolong the lifetime of the machine.


 

Closed-Loop Air Circuit Cabinet



Plug-in Connector

  • Are you still worry about the long installation period?

  • Are you still freak out about the messy arrangement of wire?

  • Are you still headache about the troubleshooting during debugging?

EETO understands your situation and adopts plug-in connectors on our machines. That helps a lot to save the machine installation period. And it’s easier to find the trouble spot once the machine is malfunctioning.


 

Plug-in Connector

 



Dust Cover & Fabric Bellows


火烧波纹管

These small details of the dust cover bellows are easy to be overlooked, but they are extremely important for plant safety, personal safety and machine safety.


Shielded wires and corrugated pipes are all fireproof materials, and attention is paid to the overall safety protection of each small device. A small protective device sometimes protects not only a peace of mind, but also a living life.


The dust cover can not only prevent dust, but also reduce the risk of fire when the machine is used in high frequency.



SPECIFICATIONS

 

Sheet category

Carbon Steel, Stainless Steel, Mild Steel, Brass, Aluminum, etc.

Processing Area

3000X1500mm /Customized Available

Fiber Laser Power

3000W-15000W

Max. Acceleration

1.5 G

Max Traveling Speed

150m/min

Positioning Accuracy

±0.02mm/m

Repositioning Accuracy

±0.05mm

Total Power Consumption

25.5KVA~50.8KVA

Power Supply

380V 50Hz/ 380V 60HZ/ 220V 60HZ

Total Weight

over 10T

Dimensions

9314*2931*2475mm

 

Cutting Sample

 

GII-CUTTING-SAMPLE-1200x401

 


As our belief, small details make big differences! 
For more details of cooperation, please feel free to contact us.
 
Wuhan EETO Laser Equipment Co.,Ltd © 2021 - ALL RIGHTS RESERVED

Follow us