FLX Gll laser metal plate cutting machine with switch table and full surround fiber.
It has a maximum power of 10,000 - 20,000 watts and a maximum cutting thickness of 40 - 50 mm.
Fully protected design, safe and environmentally friendly.
High-end standards meet your special needs, with CE certification and power testing, high processing accuracy, fast, long service life, and no after-sales warranty worries.
|Maximum Traveling Speed||150m/Min|
We have updated all major components of the FLX-GII series.
In order to cut thicker plates and meet higher requirements and cutting effect, we have upgraded the configuration comprehensively.
The new generation of FLX-Gll can not only cut the 25-40mm thick plate, but also exchange the workbench for 24 hours without stopping, which greatly improves the cutting speed.
The next generation FLX-GII supports high-power 8000W-15000W lasers (IPG and Raycus lasers are available)
|Laser Cutting Head||BM114(Raytools),Switzerland||Pro-cutter(Precitec),Germany|
|Driver Motor||Yasakawa,Japan||Beckhoof,Germany |
|Linear Guide Rails||TBI,Taiwan||Rexroth,Japan|
|Rack and Pinion||YYC,Taiwan||Alpha,Germany|
Precitec Auto-focus Laser Cutting Head
Ultra high pressure tensile aluminum beam
Using ultra-high pressure drawing process and lightweight design, its quality is reduced by 30% compared with cast aluminum beams, and its strength and rigidity are increased by more than 20%
Adopts the exchangeable worktable to save loading and unloading time, and to chieve high work efficiency.
<More stable and faster.
<It adopts an up and down chain-type parallel exchange platform,chain transmission system realizes fast and stable exchange of the table.
<The converter is responsible for controlling the exchanging motor.
<Less load time and more efficient.
<The machine is able to finish the platform exchanging within 15s.
Q:What's the working area of our fiber laser cutting machine?
A:Our standard working areavis 3000*1500MM.But we can also do customized sizes as request.
Q:What the laser powe of our fiber laser cutting machine?
A:Now our standard laser power include 1000W,1500W,2000W,3000W,4000W,6000W,8000W-15000W.
Q:What materials can we cut?What's the cutting thickness of fiber laser cutting machine?
A:Fiber laser cutting machine can cut most metal materials,but generally used for cutting carbon steel and stainless steel.Cutting thickness is from 0.5mm to 40mm according to different laser power.
Q:What are consumables of fiber laser cutting machine?
A:Generally include protection lens,cutting nozzle and ceramic body.
Q:Can we cut both sheet plate and pipe in one machine?
A:Yes,our sheet and pipe lasr cutting machine can do that.
Q:What's the delivery time?
A:Generally speaking,lead time is 30-50 working days after deposite received.
Laser head anti-collision
Detect obstacles such as uplifted workpieces in advance to avoid damage to the cutting head and ensure continuous processing.
After the perforation is completed, the laser head executes the vortex motion trajectory to avoid the residual slag on the edge from affecting the cutting effect.
Constant air pressure
Ensure that the actual cutting air pressure is consistent with the input value.
The perforation function is executed from the cutting head in position, and the cutting head drops to the cutting height to complete the perforation.
No waste edge cutting
Unbounded cutting is not affected by the format and material, one-key opening function, no need to repeatedly adjust, no programming, and check to complete the expected cutting.
Automatic cleaning of copper nozzle
Automatically clean the nozzle to cut slag without manual intervention, fast and efficient.
Thick plate cutting heat compensation
Focus compensation solves the problem of cheap focus caused by thermal deformation of the lens and ensures stable cutting.
Save gas consumption
Professional nozzles use cutting copper nozzles with corresponding apertures to cut plates of different thicknesses to reduce gas consumption and improve cutting efficiency.