Single Mesa Carbon Steel Sheet Fiber Lasercutting machine FLS-3015 4000W

4000W Single Mesa Carbon Steel Sheet Fiber Laser  cutting machione FLS-3015 series

Characteristics and application of cutting machine:

Compared with the traditional oxyacetylene, plasma and other cutting processes, the laser cutting speed is fast, the cutting seam is narrow, the heat affected zone is small, the perpendicularity of the cutting seam edge is good, and the cutting edge is smooth. At the same time, there are many kinds of materials that can be laser cut, including carbon steel, stainless steel, galvanized sheet, titanium, aluminum, alloy steel, copper, etc. With the rapid development of market economy and the rapid change of science and technology, laser cutting technology has been widely used in the fields of automobile, machinery, electric power, hardware and electrical appliances. 

Principle of laser cutting:

Under the control of the computer, the laser is discharged through the pulse, so as to output the controlled repetitive high-frequency pulse laser to form a beam with a certain frequency and pulse width. The pulse laser beam is transmitted and reflected through the optical path and focused on the surface of the processed object through the focusing lens group to form fine and high-energy density light spots, which are located near the surface to be processed, Melt or gasify the processed material at an instant high temperature.

 

Parameter:

MODEL	EETO-FLS3015
OUTPUT POWER	4000W
CUTTING AREA (L*W)	3000*1500
MAX CUTTING THICKNESS	14mm CS; 8mm SS
MAX IDELING SPEED	80m/min
POSITIONING ACCURACY	±0.03 mm
RE- POSITIONING ACCURACY	±0.02 mm
CONTINIOUS WORK TIME	24H
POWER SUPPLY	AC380V±5%（50HZ/60HZ)
TOTAL GROSS WEIGHT	6Tons
TOTAL DEMENTION(L*W*H)	4300*2300*1700mm

Our design

For machine installation

We Use Advanced Tools To Control Precision On Every Installation Steps

Machine installation is important for checking quality of a laser machine, especially motion parts installation, which is used for ensure running and cutting accuracy, here we introduce you how we install our laser machine Linea

1.Linear guide parallelism examination, our requirement <t0.02mm

2.Rackc installatian, accurscy lower than <ta.02mm

3.Parallelism check between two guides, our accuracy requirement 0.02mm

4.Linear guide hard ness and straightness detection, our requirement+0.02mm

Application comparison

Process name	Slit	Deformation	Accuracy	Circular change	Speed	Cost
Laser cutting	small0.1-0.3	small	high0.2mm	more easy	faster	higher
Plasma Cutting	small	larger	high1mm	more easy	fast	lower
Water cutting	larger	small	high	easy	fast	higher

Standard Package
Package and Delivery are of great important part in aftersales service,  we provide all-round and complete services to customer to make sure your products arrive safely without damages. For packaging.
1. We use wooden cases that meet international export standard
2. All the motion parts are lubricated  and covered with firm to avoide direct air contact and thus prevent getting rust.
3. The whole machine and parts are well packed and  fixed inside of the wooden case without moving or sliding inside.
4. The inner space of the wooden case will be made into vaccum to keep dry and the plywood case will be covered with waterproof cloth to stop rain drops or sea water from entering the wooden case

After-sales Service

1. Based on Service-oriented conception, complete pre-sales and after-sales services for customers will be provided like installation, testing, training and maintenance.
2. Before signing a contract, parameters and processing technics will be explained and given to customers to make product fully comprehended.
3. After signing a contract, transport vehicle or ship will be arranged to carry goods to the appointed location within delivery period, and engineers will be sent on site later for installation, lasting 1-2 days.
4. Training period takes about 3-4 days till all the operations are perfectly performed under regulations.
5. We promise to visit our customers once a year ,during the visit, we will help them with machine maintenance, operation, and enhance their knowledge and operation skills.

Namely:

Power-on/off procedures
Operations of control panel ;
Parameter setup
Operations of software; Clean and maintenance
Common hardware troubleshooting; Warnings during operation.

Extra Tech Support

Two-year warranty guaranteed from EX-factory, meanwhile, lifelong maintenance succeeds after warranty. Any malfunction or damage occurs during warranty ( man-made causes and force majeure exclusively), please email or call us immediately, professional engineers will be arranged on the resolution, all the charges are free including cost of changing new parts (consumable parts excluded).

Our promises: 24 hours on-line service and response time less than 2 hours

15 days after signing a contract, a layout drawing will be sent to user( including preparations on foundation, water, electricity, gas, air/water pipe, interface, etc). Preparatory works and space spared for machine installation are required on user side . Professional engineers then will be dispatched after all these preparations are finished, In order to run everything smoothly, on-site assistance from user side will be quite necessary.

Our Customers
EETO are delicated to bringing best laser products to the world-wide customers, we are establishing up our sales network and network of distributors, now we have close contact with many clients from a great many countries like Thailand, Indonesia, Malaysia, Singapore, Taiwan, Spain, Macedonia, Canada, U.S.  Mexico, , Brazil, Argentina.... welcome to work with EETO, and WELCOME TO JOIN US!

Cut sample