EETO-FLX-Gll series is the most hot-sale model nowadays. It designed with double working table and full-cover, so it is very suitable for the customers who have high requirement for work efficiency and personal safety. It also very suitable for equipping auto-loading device to make the whole cutting system more automation and labour-free.overview
There`s always one bright spot that catches your eye :)
--Closed loop bus control system to ensure high cutting accuracy
--German high-precision transmission system components: reducer, rack, gear, etc.
--Adopt autofocus cutting head to shorten the perforation time of thick plate cutting
--The cutting head has a built-in zoom module to automatically compensate the focus position.
|Maximum Traveling Speed||150m/Min|
We have updated all major components of the FLX-GII series.
In order to cut thicker plates and meet higher requirements and cutting effect, we have upgraded the configuration comprehensively.
The new generation of FLX-Gll can not only cut the 25-40mm thick plate, but also exchange the workbench for 24 hours without stopping, which greatly improves the cutting speed.
The next generation FLX-GII supports high-power 8000W-15000W lasers (IPG and Raycus lasers are available)
|Laser Cutting Head||BM114(Raytools),Switzerland||Pro-cutter(Precitec),Germany|
|Driver Motor||Yasakawa,Japan||Beckhoof,Germany |
|Linear Guide Rails||TBI,Taiwan||Rexroth,Japan|
|Rack and Pinion||YYC,Taiwan||Alpha,Germany|
IPG 15000W Fiber Laser,Germany
The IPG laser imported from Germany has the advantages of multiple laser output wavelengths, high stability, adjustment-free and maintenance-free, which are unmatched by traditional lasers.
The comprehensive electro-optical efficiency is as high as more than 20%, which not only greatly saves power consumption, but also brings savings in operating costs.
Precitec Auto-focus Laser Cutting Head
The EETO-FLXGII laser series uses the finest laser cutting head (Precitec), a model called a pro-cutter, there is a small motor inside to control the focus lens to change its position when cutting to different depths.
Beckhoff EtherCAT Control System
What's more,we have got in-depth cooperation with Beckhoff's R&D department,and special designed mang useful functions for our customers.
These functions can help a lot for intensive work and mark some works more convenient.
Ultra high pressure tensile aluminum beam
Adopts the exchangeable worktable to save loading and unloading time, and to chieve high work efficiency.
<More stable and faster.
<It adopts an up and down chain-type parallel exchange platform,chain transmission system realizes fast and stable exchange of the table.
<The converter is responsible for controlling the exchanging motor.
<Less load time and more efficient.
<The machine is able to finish the platform exchanging within 15s.
|Switching table||Fully en closed design|
|Real-time cutting monitoring system||Strong and humanized full enclosed appearance design|
HIGHLIGHT of EETO-FLX-GII LASER CUTTING MACHINE
1. high rigidity of the machine tool bed, exclusive high temperature control standard furnaces annealing treatment, can guarantee the precision of the machine tool is stable for a long time does not change.
2.Imported original fiber laser generator with good beam quality, stable performance, no reflector lens, no need to adjust the optical path, basic maintenance free, service life can reach more than 10 hours;
3.fiber laser with high Electro-optical conversion efficiency, conversion efficiency of 30%, the power consumption can be saved greatly when working.
Laser head anti-collision
Detect obstacles such as uplifted workpieces in advance to avoid damage to the cutting head and ensure continuous processing.
After the perforation is completed, the laser head executes the vortex motion trajectory to avoid the residual slag on the edge from affecting the cutting effect.
Constant air pressure
Ensure that the actual cutting air pressure is consistent with the input value.
The perforation function is executed from the cutting head in position, and the cutting head drops to the cutting height to complete the perforation.
No waste edge cutting
Unbounded cutting is not affected by the format and material, one-key opening function, no need to repeatedly adjust, no programming, and check to complete the expected cutting.
Automatic cleaning of copper nozzle
Automatically clean the nozzle to cut slag without manual intervention, fast and efficient.
Thick plate cutting heat compensation
Focus compensation solves the problem of cheap focus caused by thermal deformation of the lens and ensures stable cutting.
Save gas consumption
Professional nozzles use cutting copper nozzles with corresponding apertures to cut plates of different thicknesses to reduce gas consumption and improve cutting efficiency.
Q:What's the working area of our fiber laser cutting machine?
A:Our standard working areavis 3000*1500MM.But we can also do customized sizes as request.
Q:What the laser powe of our fiber laser cutting machine?
A:Now our standard laser power include 1000W,1500W,2000W,3000W,4000W,6000W,8000W-15000W.
Q:What materials can we cut?What's the cutting thickness of fiber laser cutting machine?
A:Fiber laser cutting machine can cut most metal materials,but generally used for cutting carbon steel and stainless steel.Cutting thickness is from 0.5mm to 40mm according to different laser power.
Q:What are consumables of fiber laser cutting machine?
A:Generally include protection lens,cutting nozzle and ceramic body.
Q:Can we cut both sheet plate and pipe in one machine?
A:Yes,our sheet and pipe lasr cutting machine can do that.
Q:What's the delivery time?
A:Generally speaking,lead time is 30-50 working days after deposite received.
About EETO Laser
About EETO Laser
An ambitious laser cutting machine manufacturer that enjoys a leaping growth over the past 8 continuous years.
Laser cutting machine and parts exporter in China.
Metal sheet and pipe processing machinery & parts international trading and exporting.
Tech service provider, including machine installation, debugging, upgrading, maintenance, trouble-shooting.
Purchasing service provider, we help purchase all the industrial machinery and parts for clients.
1) According to customers demands, provide relevant technical guidance.
2) Assist customers to design and make solutions considering technical feasibility.
3) Provide equipment demonstration for customers to investigate, make samples and do test etc.
1) 24 Hours online service.
2) 1 year warranty for the whole machine except for wearing parts.
3) Engineers available to service machinery overseas.
4) Offer help out of warranty.
5) Clients come to factory learning.