HIGHLIGHT OF EETO-FLX LASER CUTTING MACHINE
·Dual working table makes it easy for fast and stable table exchange,saving production time greatly.
· Heawy duty structure design with strict processing methods,ensuring long life time.
·User-friendly operation system with embedded nesting software.
·Closed-loop gas path monitoring system to avoid gas pollution and ensure electrical safety.
MAIN PARTS
Raylools Laser Cutting Head
Switzerland Imported
Auto Fous
Fast Piercing
IPG Laser Generator
Germany Imported
Compact design,easy for intergration
Convenient for maintenance
CSK Liner Guide
Importde from Taiwan
High Precision and high rigidity
Longer lifetime
KH Rack&Pinion
Importde from Taiwan
High Seed and high precision
High perfeimance
Delta Servo&Motor
Imported form Japan
High precision and high rotate speed
High stability
DETAILS
External Optical Fiber
1.The external optical fiber specially improved to reduce the damage of the optical fiber makes the installation of the machine so simple. You only need to remove the cutting head without removing the optical fiber, and then connect the cutting head to the external interface of the optical fiber and hang the optical cable on the machine.
2.This detail is rare in the market. It not only solves some of the problems of lack of experience in installing the machine, avoids dismantling the optical fiber to cause damage, but also scientifically avoids the internal pollution of the optical fiber, so that your machine can last longer.
3.The external optical fiber makes you no longer need to frequently delay the construction period due to the damage of this important component, which saves you a lot of maintenance and replacement costs.
European Standard Electrical Cabinet
EETO’s machines is customized for overseas users. Adapted European standard electrical cabinet, the wiring is neat and the color of the wires meets the requirements of European standards.
Closed-Loop Air Circuit Cabinet
1. If the auxiliary gas runs out, but the operator cannot figure it out on time. Then the workpieces damaged, What should we do?
2. If the auxiliary gas is too wet or too dirty, cause the optical glasses to contaminate then the whole cutting head is damage. What should we do?
3. If we need to cut various materials, keep changing auxiliary gas causes the gas cost to increase. What should we do?
Here, EETO has a solution for those issues. Our closed-loop air circuit cabinet can save cost, increase the production speed and prolong the lifetime of the machine.
Plug-in Connector
Are you still worry about the long installation period?
Are you still freak out about the messy arrangement of wire?
Are you still headache about the troubleshooting during debugging?
EETO understands your situation and adopts plug-in connectors on our machines. That helps a lot to save the machine installation period. And it’s easier to find the trouble spot once the machine is malfunctioning.
Dust Cover & Fabric Bellows
1.These small details of the dust cover bellows are easy to be overlooked, but they are extremely important for plant safety, personal safety and machine safety.
2.Shielded wires and corrugated pipes are all fireproof materials, and attention is paid to the overall safety protection of each small device. A small protective device sometimes protects not only a peace of mind, but also a living life.
3.The dust cover can not only prevent dust, but also reduce the risk of fire when the machine is used in high frequency.
TECHNICALl DATA
Model | FLX3015 | FLX6025 |
Laser power | 3000-15000W | |
Working area | 3000*1500mm | 6000*2500mm |
Position Accuracy | ±0.03mm | |
Repeatability Accuracy | ±0.05mm | |
Maximum Traveling Speed | 100m/min | |
CUTTING SAMPLES
10mm stainless steel
1mm brass
1mm stainless steel
0.8mm stainless steel
8mm stainless steel
8mm aluminum plate cutting holes